Explore how certain aircraft components—landing gear motors, cowl and wing flap motors, and radio transmitters—draw significant current only during specific actions. This look at load profiles helps clarify power distribution in aviation systems and why bursts matter for design and reliability.

Multiple Choice

Name several types of electrical devices that would be considered intermittent loads on an electrical system?

Intermittent loads are electrical devices that draw significant current only during specific operations or moments, not continuously. Landing gear motors are powered only during gear extension or retraction, so their demand on the electrical system appears in bursts rather than all the time. Cowl and wing flap motors follow the same pattern, activating only when adjustments to flaps or cowl flaps are needed. Radio transmitters consume notable power when they are transmitting, with only minimal standby draw otherwise, so the main load occurs during operation rather than continuous service. Because each of these devices draws substantial current only during particular actions, they all fit the description of intermittent loads. All of the above.

Intermittent loads aren’t flashy like the constant hum of a bus powered by a healthy generator. They’re bursty, momentary power demands that spike when the system needs them most and fade back to a quiet idle when the moment passes. In aircraft electrical systems, these loads are especially important to understand because they can dramatically affect how a bus behaves, how protections are sized, and how reliable the whole airplane feels in the cockpit. Think of intermittent loads as the short, sharp “pulses” in the electrical heartbeat of an aircraft.

What makes a load intermittent, anyway?

Let’s unpack the concept with a down-to-earth analogy. Imagine your home’s electrical system. A toaster or a microwave runs for a few minutes and then stops, while the fridge hums away in the background. In aviation, you’ve got similar patterns: some devices spike power only during a specific maneuver or event, and then they’re quiet for long stretches. The important thing isn’t just how much current they draw, but when they draw it. If a device pulls a lot of current only during a precise moment, it’s an intermittent load.

Three classic examples on most aircraft

Landing gear motors

When you think of the landing gear system, the behavior becomes clear. The gear motor is energized only during gear extension or retraction. Most of the flight it stays off, waiting in the wings, and when the pilot commands gear up or down, the motor roars to life, handles the heavy lifting, and then settles back to an idle state. That bursty demand can be quite substantial, especially if you’re dealing with a hydraulics-assisted or electrically assisted mechanism. The key takeaway: the gear motor’s current draw spikes for a short window and then vanishes for the majority of the flight.

Cowl and wing flap motors

Cowl flaps and wing flap systems are another excellent example of intermittent loads. They aren’t cruising all the time; they’re engaged when the airplane needs to manage engine cooling or adjust lift characteristics for approach, landing, or certain high-performance maneuvers. The motors run as needed, often in bursts, and then sit idle while airspeed, altitude, and engine conditions settle. The electrical system must be ready for those short, purposeful bursts without being taxed during the idle periods.

Radio transmitters

Radio equipment can also show intermittent behavior, though in a different sense. A transmitter draws a noticeable amount of power when it broadcasts a signal, which can happen in bursts during communication bursts, navigation pings, or data transmissions. In between transmissions, the standby or receive current is much smaller, so the main electrical demand aligns with the moments of active transmission. This pattern—high draw during transmission, low draw otherwise—fits the intermittent profile neatly.

Why this distinction matters for the electrical system

  • Sizing and protection: If you misjudge the peak currents of intermittent loads, you risk either overdesigning the system (wasting weight and complexity) or underestimating the protection requirements (risking nuisance trips or, worse, actual electrical faults during those bursts). Protective devices, wiring gauge, and bus architecture need to accommodate those bursts without compromising other loads that are on the same electrical backbone.

  • Power management and sequencing: Modern aircraft leverage power management strategies that prioritize critical systems and sequence loads. When an intermittent load comes on, the system may shed or defer nonessential loads to make sure essential systems have the electricity they need. That requires careful control logic and clear understanding of load timing.

  • Reliability and fault tolerance: Intermittent loads can mask underlying issues if you’re not listening closely. A motor that stutters during gear extension might indicate a marginal actuator, a cable issue, or a control signal problem. Because the device isn’t on all the time, you may miss a symptom unless you’re monitor-savvy and data-aware.

  • Thermal considerations: Bursts of current don’t just stress wires; they heat up components. A motor that winds up quickly can generate a spike in thermal load that affects latching relays, contact resistance, and even sensor accuracy right when you don’t have time for a cooling pause. So, designers sometimes factor in thermal inertia into the timing and protection schemes.

Design thoughts that keep intermittent loads behaving nicely

  • Separate or carefully partitioned power rails: By dedicating a portion of the electrical system to high-current intermittent devices, you reduce the risk that a burst from one device drags down other critical systems. Think of it as giving the bursts their own lane.

  • Energy storage and buffering: Capacitors or small energy storage elements near the actuator or transmitter can smooth out the immediate current spike, letting the power source ride the bump without drooping the rest of the bus.

  • Controlled sequencing: A smart power management unit can anticipate and stage bursts. For instance, extending landing gear might temporarily power down nonessential systems or reduce fan speeds to keep the supply steady.

  • Robust protection schemes: Fuses and breakers that respond to the right time constants are essential. A fast-acting element protects against a short, intense fault, while a slower device guards against longer, less dramatic overloads. The balance matters a lot when bursts are the norm.

  • Monitoring and diagnostics: Recording peak currents, durations, and the frequency of bursts helps maintenance teams detect drift or wear. It’s not just about staying safe in flight; it’s about staying ahead of expensive component failures.

Real-world flavor: stories from the electrical backbone

Aircraft systems aren’t built in a vacuum of theory. You’ll hear anecdotes from technicians who’ve felt the telltale thump of a gear motor that’s not quite delivering its usual punch, or from crews who’ve noticed that flap retraction feels a touch slower than expected during busy approach patterns. In some cases, what looks like a simple intermittent load is actually a hint of a degraded connector or a loosened terminal. The bursts expose weakness that a steady-state test might overlook. That’s why a healthy maintenance mindset treats intermittent loads as more than just “on only sometimes”—they’re indicators of system health, timing, and reliability.

A broader view: other intermittent loads you might encounter

  • Cabin systems like air conditioning packs that cycle on and off, especially on older airplanes or in hot climates.

  • Engine starter motors that energize briefly during start or emergency procedures, not during normal cruise.

  • Flight-control actuators that position surfaces in response to control inputs, with bursts correlated to maneuver demands.

  • Anti-ice and de-ice equipment that activates during icing conditions or specific flight phases and then rests until needed again.

A practical way to talk about this with students or teammates

If you’re teaching or learning this topic, frame it around timing and impact. Ask:

  • When a device engages, how much current does it draw, and for how long?

  • Does that burst affect other loads on the same bus, and how do we mitigate any cross-talk or voltage droop?

  • What protections are in place, and are they tuned to the actual burst characteristics?

  • How do we verify performance without waiting for a real-world burst to occur in flight?

Bringing the concept home with a simple mental model

Close your eyes and picture the aircraft’s electrical system as a city power grid. The streetlights are your baseline loads, quietly humming away. Then, a street festival kicks off and a few portable generators suddenly power up—boom, a surge in demand. The grid has to cope, reroute, or shed some other traffic so the festival doesn’t crash the whole neighborhood. In aviation, the festival is a burst load: a gear motor, a flap motor, a transmitter, or another device that ramps up for a moment to do its job and then returns to calm. The grid—your electrical bus, wiring, and protection devices—has to manage that surge smoothly so the airplane keeps flying without a hitch.

The end-to-end story: learning to read the electrical heartbeat

Intermittent loads are not quirky oddities; they’re a fundamental aspect of how aircraft systems interact with the airframe, the environment, and the crew. By recognizing the patterns—bursts of power tied to specific actions—we gain a clearer sense of how designers choose hardware, how protections are shaped, and how pilots experience a well-behaved electrical system. It’s about understanding timing, current paths, and the way a well-tuned system responds when a handful of devices decide to wake up and do their thing.

If you want a quick checklist in the classroom or workshop

  • Identify which devices cycle on and off (gear motors, flap/cowl motors, transmitters, and similar components).

  • Note the peak current and the duration of each burst.

  • Check how the loads are distributed across buses and how sequencing is managed.

  • Review protection devices: are fuses/breakers sized for the transient nature of the bursts?

  • Consider thermal effects during bursts and whether cooling paths are adequate.

  • Look at monitoring data: do we have legible trends that reveal creeping degradation in intermittent loads?

A closing thought

Intermittent loads aren’t the drama queens of the electrical world, but they’re the ones who keep you honest. They remind us that reliability isn’t just about the steady hum of the system; it’s about the right kind of surprise—brief, predictable, and safely contained. The moment a landing gear or flap motor briefly lights up the cockpit with its determined push is the moment the entire electrical architecture proves its mettle. And when it does, you get to appreciate how engineers design for those bursts with the same care they show for the steady, unglamorous, always-on life of an aircraft’s heart.